If you just started to play drums, it is good to know that one of the best ways to ensure that your instrument will sound great is to replace its heads regularly and tune them properly. Top head replacements are more frequent, but the bottom head must also be changed every third top head change, because they can still go dead.
When you perform a diy drum head replacement, your main concern should be to set it properly. As for tuning it, you can experiment with different tunings, as there is no right or wrong way to tune.
A few other important tips:
- Do not over tighten your drum’s resonant head, because it is thin and you may tear it down. This tip is particularly important in the case of snare drums, because their resonant heads are thinners than others.
- You might also need to make some fine adjustments, once you install the new heads. For example, in the case of snare drums, you should reduce rattle by sliding a stick underneath the snare wires.
- In the case of installing bass drum heads, install the batter head first, because it will make it easier for you to put in a muffling system without taking the resonant head off again.
- If you are changing only the batter head, make sure to re-tune the resonant head once you are done.
The music stores like https://www.denverpercussion.com/repairs/ offer drum head replacement and repair services too and is good to keep in mind if you are running short of time to do it yourself.
Original Post over here: Diy Drum Head Replacement Tips
No comments:
Post a Comment